The device features a comprehensive system with full-spectrum RTK capabilities, offering positioning frequencies ranging from 50 to 100HZ. It is equipped with built-in 4G universal networking, WIFI, and dual-mode Bluetooth, providing seamless connectivity. With 32GB of storage, it boasts ample space for data storage. The long-lasting battery ensures up to 15 hours of usage, while the C-port fast charging capability allows for a full charge in just 2 hours. Additionally, it comes with a positioning anti-loss function, ensuring peace of mind and convenience.
It also has the characteristics of small volume, light weight, high precision and complete functions. It can serve as a reference station Or a measuring station. It is a high-precision positioning device. Preferred measuring device. Cube RTK built-in full-frequency or four-system eight-frequency high-precision satellite positioning module frequency, high-precision measurement satellite receiving antenna, IMU tilt measurement module.
1. Two working modes, the user can choose one of the two modes, base station mode and measuring station mode.
In station mode, you can choose to turn the inertial navigation tilt measurement function on or off.
2. In base station mode, users can customize coordinate acquisition (auto convergence/differentiation) and choose RTCM data upload methods (4G/WIFI/LORA, manual NTRIP/MQTT, or Glacier MQTT), offering flexibility and control.
3. In measuring station mode, users can set how to obtain differential data (4G/WIFI/BT/LORA,
Glacier NTRIP/ Manual NTRIP/ Glacier MQTT/ Manual MQTT), you can also set whether tilt measurement is enabled or not function.
4. In the GNSS satellite system, users can customize the constellation;
Frequency point, positioning frequency, minimum elevation.
5. USB interface working mode, charging, virtual serial port, U disk.
6. Wireless communication, 4G, WIFI, LORA, Bluetooth. Users can query data card status, recharge, WIFI hotspot Settings; And LORA communication setup via applet or APP.
7. Positioning data sent by RTK board can be stored in TF card;
Sending data through Bluetooth and sending three operations
Users can configure RTK commands and achieve transparent transmission via USB virtual serial port or Bluetooth SPP, offering flexible connectivity options and seamless data transmission.
GNSS performance | |
Tracking frequency |
GPS/QZSS: L1/L5 ; BeiDou : B1I/B2a ; GALILEO: E1/E5a ; GLONASS: G1(£K) |
Data update frequency |
1Hz/5Hz |
Sensitivity |
Track :-165dBm ; Recapture:-160dBm ; Capture sensitivity:-148dBm |
Speed accuracy |
0.1m/s |
First positioning time |
Cold start: 30s ; Hot Start :2s |
RTK accuracy |
Horizontal accuracy: 1cm + 1ppm ; Elevation accuracy:2cm + 1ppm |
Physical Specifications | |
Volume |
104*104*65mm |
Weight |
450g |
Bottom thread |
3/8inch |
Battery capacity |
6000mAh |
External interface |
Type-C |
Protection class |
IP67 |
Performance Specifications | |
Battery life |
20h(Base station mode, WIFI upload) |
Supported Differential Methods |
NTRIPxBluetoothJMQTT |
Storage card |
Built-in TF card,16-128GB |
SIM card |
SMD card / plug-in card |
Bluetooth |
Bluetooth5.2 |
WIFI |
IEEE802.11b/g/n |
LoRa |
Support400-500MHZx800-900MHz |
4G full Netcom |
LTE-FDD:B1/B3/B5/B8 ; LTE-TDD: B34/B38/B39/B40/B41 |
Operating environment | |
Working temperature |
-20OC ~ 70OC |
Storage temperature |
-20OC ~ 70OC |